C斯达克

471 Topics 2.5k Posts
  • 5 Posts
    964 Views

    @李东岳 啊:xinlei: ,东岳老师,您这么一提醒我才发现自己没有去看paraview.org的Linux分页面,我之前心思一直都在paraview.org的win版本页面上:zoule: ,再次谢谢东岳老师,抱歉又给您添麻烦了:135: 。

  • kvm也挺奇葩的

    2 Posts
    562 Views

    买了个迈拓维矩的,这个可以切换,并且用起来目前来看还可以

  • 如何处理奇点

    2 Posts
    542 Views

    如果a/b 是一条曲线, b有的时候为0

    要根治的话,就是让b不为0

  • 2 Posts
    2k Views

    乒乓球带坑可能就变更更更贵了:tishizi:

  • 大家做模拟用MATLAB多吗?

    10 Posts
    5k Views

    @jerry 来的有点晚了,下载不了了。能给个书名吗?谢谢

  • 1 Posts
    555 Views

    英国谢菲尔德大学(The University of sheffield)Energy2050团队(http://energy2050.ac.uk)在招一个做CFD方向的全奖博士,做旋转填料床反应器捕捉二氧化碳的CFD仿真研究,对此职位感兴趣的研究生或者优秀本科毕业生可以申请(可直博),目前的申请截止日期是2022年7月22日(可能推迟),如来不及,入学时间可推迟到明年一月。

    谢菲尔德大学,世界百强名校,著名的CFD仿真软件Fluent的发源地,课题组学术氛围很好,适合静心搞科研。课题组在CFD领域有几十年的研究基础,在CCUS领域有丰富的研究资源,课题紧扣国内火热的"双碳"主题,该细分方向组里有7年的研究基础了,可以在前人的基础上接着做。

    具体招聘信息如下:
    We have a fully funded PhD studentship and look for applicants open to both UK and international students: Engineering doctorate (EngD): Predicting performance of intensified carbon capture inside rotating packed beds using CFD modelling

    If you know any good students from China, or the UK, please encourage them to apply.
    Any questions then let them to contact Professor Lin Ma: https://www.sheffield.ac.uk/mecheng/people/academic/lin-ma

    The advert is on findaphd.com: https://www.findaphd.com, search for the project 搜索 predicting performance of intensified carbon capture inside rotating packed beds using cfd modelling。

    或直接通过以下链接:https://www.findaphd.com/phds/project/engineering-doctorate-engd-predicting-performance-of-intensified-carbon-capture-inside-rotating-packed-beds-using-cfd-modelling/?p145128#opennewwindow

    Please make sure that they apply through the university of sheffield website: https://www.sheffield.ac.uk/postgraduate/phd/apply/applying.

    课题介绍:

    Carbon capture is considered the only technology able to decarbonise the hard-to-abate industries. many of these industries utilise legacy sites with little space for large new unit operations required in conventional carbon capture. rotating packed beds (RPB) look to solve this problem by intensifying carbon capture and reducing the footprint required by up to ten times, while also significantly decreasing the capital cost of these units. when combined with proprietary solvents, it is believed the cost of capture can be reduced to $30/tonne CO2 in some cases, helping to enable the rapid uptake of carbon capture and progression towards net zero.

    RPB are a novel technology that utilise the principles of process intensification to enhance the performance of mass transfer processes between fluids. given the application of rpb to the field of CO2 capture is relatively new, there is uncertainty regarding the impact of different process variables on the performance of the rpb that would otherwise require a significant amount of practical experimentation to investigate. computational fluid dynamics can enable the process to be accurately modelled, allowing for quick and inexpensive prediction of performance under various conditions.

    In this project a rotating packed bed absorber will be modelled in ansys fluent, with validation of the model’s outputs through use of the 1 tonnes of co2 per day (TPD) pilot-scale rotating packed bed absorber at the university of sheffield’s translational energy research centre. Initial research will involve investigating the impact of operational conditions and physical properties of the solvent on capture performance. As the project continues, the scope will widen to include sensitivity analysis of design parameters and the impact of scaling the RPB absorber on the existing project outputs and learnings. Additionally, further rotating unit operations could also be investigated.

    This project will utilise and develop your knowledge surrounding CFD modelling, mass and heat transfer, reaction kinetics and chemical equilibria. You will work closely with carbon clean, a global leader in the development of carbon capture technology and pioneers in the use of RPB for industrial decarbonisation. Your findings could directly impact the design and operation of commercial working carbon capture facilities, supporting the pathway to net zero.

    We are seeking applicants to start in september 2022.

    The project will be part of the EPSRC-supported centre for doctoral training in resilient decarbonised fuel energy systems. The student who undertakes it will be one of a cohort of over 50 students in a broad range of disciplines across the universities of sheffield, nottingham and cardiff.

    The research work will be based in the energy research group within the department of mechanical engineering and the translational energy research centre (TERC) at sheffield which is a brand new, high profile, innovation focused national research facility. You will be working within an exciting and dynamic group with approximately over 60 researchers undertaking a broad area of energy research with approximately three years' extensive research time in industry, preparing for high-level careers in the energy sector.

    Funding notes
    The studentship will cover full university fees and a tax-free, enhanced annual stipend of £20,352, including £16,062 (2022/2023) a year for four years and a stipend enhancement of £3,750 per annum.

    英国的全奖机会非常少,机会难得,欢迎各位优秀的CFDer申请!

  • 粒子穿过可变形界面的问题

    3 Posts
    777 Views

    @bestucan 真的非常感谢您的建议。对于二维的case尝试了一下,我设置一个不变形的界面,进入filter区域的粒子数量大约是等同于流通量。但我手上的计算资源和代码的优化方面并不乐观,耗时久。如果界面变成可变形的情况,计算时间应该会加倍,时间上等不起。

  • 大家发朋友圈越来越少了

    10 Posts
    2k Views

    @李东岳 这两年的学生真的是过的没劲。。

  • 11 Posts
    2k Views

    @李东岳
    已经看到了,非常感谢您:xiexie:

  • 10 Posts
    2k Views

    @李东岳 我就记得我之前搞过,后来坑太深了,就没搞了。

    这些涉及到图形处理的各个层,又是平台不同,又是商业公司夹私货,那些个组件的名字本来就乱七八糟,缩写规则还不一样。想短时间了解就更乱。

    大概就是,可以软件渲染(OSMesa),可以硬件渲染(EGL)。
    其实都是基于Open GL,就这三个英语词空格隔开一起搜都一大堆讲更多术语关系的文章。

    paraview 默认用软件渲染,想要硬件渲染把 EGL 编译选项打开就行了,这就有个忘了打开报错的:
    https://discourse.paraview.org/t/build-paraview-for-nvidia-gpu/8309
    但这个是单GPU的,不知道多GPU的怎么搞,

    我的GPU是当显卡用的,一开paraview就调用GPU,当然是为“图形界面渲染"的,不是为“paraview渲染”的,这俩还都是opengl下面的,那些名词太乱了。

    我试着编了一下 pvserver能多线程跑在GPU上,
    Screenshot from 2022-06-11 15-52-46.png
    就是这个方法:
    https://github.com/Kitware/ParaView/blob/master/Documentation/dev/build.md

    当然编译之前已经安装好nvidia自带的驱动了。

    nvidia 早些年自己出过 paraview 的插件:
    https://www.nvidia.com/en-us/data-center/index-paraview-plugin/
    不过是针对 paraview 5 的

  • CFD和LBM的优劣势

    6 Posts
    1k Views

    @leo_chou 大批量的工业算例(本身可能不复杂,但就是工况多),LBM是不是也需要大规模网格和较长时间?工业应用CFD对时间的要求基本上是小时级别的。

    另外好奇问下,复杂几何下的LBM如何,需要湍流的LBM呢?我觉得大部分案例,复杂几何+湍流模型是标配,没有湍流的话可能有多相或者化学反应啥的,这些LBM是不是会更强一些?

  • Centos7中Ansys Geomagic显示问题

    2 Posts
    595 Views

    启动的时候在启动命令后面加上后缀试试

    -driver x11
  • cent换清华源

    1 Posts
    381 Views
    sed -e 's|^mirrorlist=|#mirrorlist=|g' \ -e 's|^#baseurl=http://mirror.centos.org|baseurl=http://mirrors.tuna.tsinghua.edu.cn|g' \ -i.bak \ /etc/yum.repos.d/CentOS-*.repo yum clean all && yum makecache
  • 2 Posts
    619 Views

    这个软件使用的太少了。好像论坛也没什么人可以讨论 :134:

  • 安装ntfs-3g

    1 Posts
    371 Views
    wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-7.repo && yum -y install ntfs-3g
  • 2 Posts
    606 Views

    Luo & Svendsen的破碎

    d00a8e37-5666-4945-8964-2dd0e626a58e-image.png

    f也是变量吗?ξmin怎么确定呢?积分好像太复杂了,不知道如何下手?有路过的大佬指点一下不?提前感谢了:chitang:

  • 国产CFD软件

    8 Posts
    2k Views

    @bestucan 还是那四个字:适者生存

  • Tecplot中涡环作图问题

    3 Posts
    815 Views

    @zhouxu 感谢您的回复,我尝试了一下,的却可以做出来。这部分本就有代码在计算。

  • 2 Posts
    698 Views

    我搜了一下,基本无解,就是用 tecplot 里的命令操作(一般功能比图形界面点点更丰富全面),也只有两个和有效数字相关的命令,还是用于显示的。

    它毕竟是个可视化软件,虽然笼统地说做后处理的。可视化是后处理的一部分,但对数据操作的能力毕竟有些欠缺。

  • 请教关于博后的问题

    26 Posts
    3k Views

    @cccrrryyy 要不有些人值得交朋友,有些人就那么回事么。

  • 18 Posts
    2k Views

    @tens 有可能下午来的 或者晚上来的有问题。
    咱讨论下一话题吧:mihu:
    :tishizi:

  • 23 Posts
    6k Views

    @五好青年 所以他们真的是套OpenFOAM吗?有接触过么。纯好奇

  • 2 Posts
    710 Views

    any official links?

  • 4 Posts
    1k Views

    @李东岳 安装ansys 时就可以同时安装cfx么?按照我经验,目前的ansys学术版里面可以直接安装cfx,不需要任何额外的操作。

  • 7 Posts
    1k Views

    我最近出现了这个情况。还有人有这个情况么,很奇怪

  • DM塔式服务器 cpu 参数

    1 Posts
    530 Views

    @李东岳 李博士,

    请问东岳流体官网的塔式工作站(DM0812, DM3.1)cpu 具体参数,像型号,主频,睿频等可否简要分享下。

    谢谢!

  • 3 Posts
    1k Views

    @bestucan 感谢回复

  • SSRN是个啥

    9 Posts
    2k Views

    @bestucan 感谢分享

  • 3 Posts
    762 Views

    @星星星星晴 好的 我搞了一个

  • 论文投稿的期刊选择

    2 Posts
    811 Views

    基于OpenFOAM开发了一个简单的程序,做的是气液两相流模拟

    看起来更符合 international journal of multiphase flow。不过这俩个都是好期刊,能中哪个都行。在我眼里没什么区别。

  • 美国底层打工人的2021年终总结

    1 Posts
    2k Views

    我是19年国庆后来的美国,基本上一直在干餐馆,中间短暂送过三周外卖。最初第一年干了11家餐馆,3家自助餐,5家日餐,3家中餐。2021年1月29号开始在这家中餐馆做企台的,就是做服务员,俗称端盘子。包吃住,底薪750$,剩下全靠小费,扣除跑菜的12%,和付给早上替我做side work的(摆桌子拖地打扫厕所),剩下的小费都是我的。

    上班时间是上午11点半左右到店里简单准备一下就开始接客打台,营业时间是11点半到晚上10点,打烊后还要收拾桌椅,录入小费,洗杯子,因为疫情,市政府允许室外就餐,摆了很多桌椅在门口大马路上,我要把椅子搬进来,把桌子归拢好,拿铁链子锁起来,最后负责锁门。离开店里大概要晚上11点左右了,所以工作时间大概是12个小时,每周6天,周二休息一天,旺季的时候只休半天。类似于996,不过我是11-11-6。

    工作内容就是打台,就是给客人点餐,上饮料,添茶续水,吃完买单,收桌子,然后翻桌接下一桌,很多时候是同时进行的。还包括接电话,把4个网络外卖平台的来单录入电脑,送到后厨。后来老板请了人负责跑菜,就是传菜,我就不用端盘子了,扣15%小费给跑菜的,后来有了寿司需要我自己跑菜,扣除的部分经常争吵降到了12%。旺季的时候请过一个老墨amigo负责带位,点饮料,上饮料,最后收桌子。那段时间我的工作就简化到点菜,买单,收桌子上的小费单。

    工作强度大概只能用每天的步数衡量了,我每天要走2万到3万步。旺季和周末五六日大概2万5到3万步,平均7天每天2万步出头。

    收入和支出情况,大概淡季6000多刀,旺季有几个月9000多。因为包吃住,每月的开销就是休息的那天去趟超市,买点吃的喝的,大概花三四十$。手机话费每月40,加油一次三十多,能跑三个多星期,上下班大概9个迈。车险合每月不到60,给儿子每月打生活费1000,偶尔每月去按摩一次加小费60块。

    这样一年下来,收入合计90341,支出19095,结余71246。跟在国内的时候收入几乎一样,不同的是单位从人民币变成了美元,从月光变成了能结余一大笔,这也是我在出国前了解了一些情况后,最终决定来美国的原因。

    21年3月底收到了移民局寄来的社安号和工卡(EAD,Employment Authorization Document)。面谈因为疫情还是等待中,所以也不算打黑工了。过两天找个会计师报税。

    为什么要来美国?我编辑了一大段,还是决定删掉了,因为涉及个人隐私,另外带有敏感的话题,不适合在公开论坛说。

    以后的计划。说实话没想好,走一步看一步吧。干几年存点钱,干不动了就去送外卖或者开卡车也说不准。实话说,不太想回去,没绿卡前回去了也就回不来了,当初的铁饭碗也没了,回去也找不到像样的工作了,因为学的文科,也没什么技能。

    另外,我的收入情况有点特殊,不是每个餐馆的企台都能挣这么多,正常情况是每月4000-5000。为什么我能挣的比别人多,因为店里就我一个全职企台,只要我能忙的过来,老板会一直让我干,我接不过来的桌子他才出手,也就再去请别人,因为再来一个人,都挣的少了,都不会继续干下去,都留不住。因为我能干,肯定,他也比较照顾我,忙的时候,有大桌他会让给我,他去接一个两个人的小桌,因为美国餐馆惯例,超过6个人就可以强制收取18%的服务费,运气好或者客人大方的,有的会在18%的基础上再签18%或者20%,多的时候一桌收到过一百四五十的小费。因为有人替我跑菜,我同时可以照顾7桌客人,平均下来每桌10刀,一个人头5刀。最多一天打了快600块。

    算下来,每天2万步,一年大概走了730万步,每天12个小时,一周6天,一年3700小时,平均一小时24.4刀,比加州最多时薪15刀还是高出不少,只有洛杉矶新毕业护士时薪的6成,所以一度我想存钱考护士,因为听说湾区护士平均年薪14万刀,有一阵很心动。就算读本科加速班,也要脱产读三年差不多,时间和学费上又让我打了退堂鼓,加上年纪也大了,马上40了。

    跟隔壁意大利餐馆的墨西哥小妹也交流过,他们生意好,他们单位时间可能挣的比我多,但是不是每天都排班,所以有的人一周要打三份工。因为老外老板会避免安排太多工时,这样雇佣的人少雇佣的时间短就不用给工人什么福利。

    其他底层人不同工种的收入情况也说一下,我做过送外卖,在洛杉矶跑doordash,类似于国内的某团,20年圣诞到21年元旦那周我还是生手(刚学会开车,刚拿到驾照刚买的车),第二周一周就挣了快1400,熟手使劲干一周能挣2000,加过华人外卖群了解的。在大城市开Uber比送外卖收入只高不低。

    了解过按摩,按摩店男的四五千,女的六七千。我去的那家床脚店,男工按脚一小时35,女工按全身一小时50,所以女的挣得多。夫妻工12000左右。

    看过一则旧金山搬家招聘月薪8000,淡季6000+,旺季10000+,不过一般人没那个力气和身子骨是干不了的。流调最辛苦那位大哥估计可以。

    根据华人职介所的招工广告和我了解的实际情况,中餐馆洗碗打杂3500,帮炒3500-4000,炒锅(厨师)4000-5000,前台接电话打带位包3500-3800,日餐寿司学徒3000-3500,助手4000,二手4500,寿司师傅5000。企台4000-5000。加州老墨洗碗15/小时。

    家政:住家阿姨,打扫卫生煮饭,15刀/小时,100-120/天,3000-3500/月

    物流公司叉车工人18-20刀/小时,经常加班5000+,送货司机200-300/天。

    装修小工150-170/天,中工200。

    结语,前几天跟朋友调侃道,早知道美国人傻钱多速来,还读什么研究生,上什么大学,跟福建人一样,中学毕业就来这边干就完了,现在不知道攒多少钱了。我也见过几个来美国赚了几套房甚至开过跑车的厨师,因为吃喝嫖赌抽,到60来岁还在干餐馆的。

    https://weibo.com/u/3764674343

  • 测试----

    4 Posts
    1k Views

    @李东岳 噢噢,好的

  • 1 Posts
    596 Views

    https://www.cfd-china.com/topic/5198

    参考这个帖子,有人可以做个STAR-CCM、COMSOL、CFX的算例么?

  • 公式卡免费发放

    3 Posts
    1k Views

    已经收到了

  • 无题--

    1 Posts
    416 Views

    部分邮件我这面没法回复,因为每天都有几十封进来处理,下面是某一天下午5点多到晚上的,就这么多。

    捕获.PNG

  • ANSYS 超算平台的使用

    3 Posts
    2k Views

    @桑葚熟了 目前没有用这些集群了,天河没用过,北京超算云那边感觉服务和价格都还不错,EasyCAE这边很久之前用的了之前价格有点小贵,现在不清楚了。

  • 5 Posts
    3k Views

    @luomuliunian 大佬这个专业了

  • 5 Posts
    1k Views

    @李东岳 嗯,两个一起下下来就可以的,之前理解错了。

  • 5 Posts
    1k Views

    WIN笔记本+linux 主机

  • 7 Posts
    1k Views

    老铁这个排版排的哎 :134:

  • 5 Posts
    945 Views

    看起来确实没辙了

  • 关于涡的各种复数

    2 Posts
    680 Views

    Screenshot_20211204_182532_cn.dictcn.android.digitize.oxford_oalecd9_17203.jpg

  • latex这个代码怎么省略

    4 Posts
    887 Views

    mark 一下

  • 论坛搜索功能挂了

    2 Posts
    687 Views

    论坛每天都有3 4万点击,一万多IP,也不知道啥时候处理好 :143:

  • UCSD-SDSU 联合博士项目招生

    1 Posts
    425 Views

    Job description
    We provide the opportunity for the joint Ph.D. program between UCSD and SDSU.

    Research motivation
    Do you know that measurement in a turbulent environment has its own "sixth
    sense"? In fluid dynamical systems, measurements can be used to figure out
    events that happened far away from the probing location.
    Through state-of-art data assimilation techniques, we can trace back the origin
    of any information we have measured. We used this technique to locate the
    release of a pollution release, and reconstruct unknown flow fields from limited
    measurements.

    Are you self-motivated to do a Ph.D. in interdisciplinary researches about fluid
    dynamics, inverse problems, and optimization? We are looking for Ph.D. students
    that are willing to spend time studying in an encouraging and creative
    environment!

    There has been a long-hovering question about how to combine experimental
    measurements with numerical simulations. Especially in terms of designing a
    turbulence model that agrees with experimental studies. In addition, the design
    of sensor networks or sensor weighting can be optimized in terms of the amount
    of information obtained.
    In this Ph.D. project, you will develop novel simulation techniques that combine
    machine learning techniques with data assimilation.

    The required skills and preferred profile
    We are looking for self-motivated young researchers from mechanical
    engineering, aerospace engineering, computational physics, applied mathematics,
    or other closely related areas.

    Familiar with MATLAB and FORTRAN with MPI. C++ and python is a plus. Good conceptual understanding of calculus and linear algebra. Experience with simple machine learning algorithms. Good communication skills including presentation skills, academic writing
    with latex or word. Please note that the GRE is required for all JDP applicants and cannot be
    waived. Having a part-time hobby is a plus.

    Location
    Work is carried out in the Data Assimilation group at Aerospace Engineering, San Diego State University.
    We study various inverse problems in fluid dynamics using numerical simulations
    with the discrete adjoint operator.
    For further information, please visit us at
    https://qiwang.sdsu.edu/

    Information and application
    Interested applicants should visit
    https://www.engineering.sdsu.edu/admissions/jointdoc_areomech.aspx
    for more details about applying for the joint program.
    Meanwhile, please reach out to Qi Wang (qwang4@sdsu.edu), including:
    • A short description of your qualifications and motivation to apply for this
    position.
    • CV or resume.
    • Transcripts from your Bachelor and Master degrees.
    Selected candidates will be invited to an interview and should prepare a
    scientific presentation as part of the requirements.

    We highly value diversity at our university. Applicants from all backgrounds are
    welcomed.

  • 翻到之前的基金申请拒信

    6 Posts
    1k Views

    不知道他们几千万的CFD算法研究经费都是怎么构成的 :143:

  • 论坛搜索功能下线了?

    3 Posts
    703 Views

    @李东岳 我发了帖子之后才发现你之前发过通知了,不是催更,抱歉抱歉~:chitang:

  • 1 Posts
    700 Views

    央企中国电子信息集团所属企业长沙军民先进技术研究有限公司招聘
    数量:6人
    工作地点:长沙市
    岗位名称:流体计算软件研发工程师
    岗位要求:
    1、流体力学相关专业;
    2、熟悉GPU和CUDA编程;
    3、熟悉C++编程;
    以上三项条件满足二项即可,满足三项者优先录取,流体力学强相关专业者也可面谈。

    基本月薪待遇8K-15K,其他待遇面谈,特别优秀的硕士博士待遇还可以商谈。
    联系人:郭先生,18908480199
    bf037a90-2b9b-464c-83da-3b501a4e6431-image.png

  • 哪位大佬用过投影仪看电视

    11 Posts
    2k Views

    @同学博 :jingya: 那我还不太知道。不知道这俩是不是一个东西。激光电视目前倒是销量比较差 :qichuang:

  • 1 Posts
    480 Views

    SPH-DEM是否适合做气液固三相搅拌