平板降膜边界条件设定（interFoam求解器）

[飞火流星jyj]

fluent中设置是这样的：
Boundary A, B and C, D
are set as periodic boundary conditions. Boundary E is set as no slip
wall. Boundary F is set as opening pressure boundary.
不知道在OF怎样设置好

FoamFile
{
    version     2.0;
    format      ascii;
    class       volScalarField;
    object      p_rgh;
}
// * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * //

dimensions      [1 -1 -2 0 0 0 0];

internalField   uniform 100000;

boundaryField
{
    inlet
    {
        type cyclic;
    }
    gasinlet
    {
        type cyclic;
    }
    outlet1
    {
        type cyclic;
    }
    outlet2
    {
        type cyclic;
    }
    left
    {
       type cyclic;
    }
    right
    {
        type cyclic;
    }
    TWall
    {
       type            fixedFluxPressure;
    }
    
    atmosphere
    {
        type            totalPressure;
        p0              uniform 100000;
        U               U;
        phi             phi;
        rho             rho;
        psi             none;
        gamma           1;
        value           uniform 100000;
    }
}
dimensions      [0 1 -1 0 0 0 0];

internalField   uniform (0 0 0);

boundaryField
{
    inlet
    {
        type cyclic;
    }
    gasinlet
    {
       type cyclic;
    }
   outlet1
    {
       type cyclic;
    }
    outlet2
    {
       type cyclic;
    } 
    left
    {
      type cyclic;
    }
    right
    {
      type cyclic;
    }
    TWall
    {
       type            fixedValue;
       value           uniform (0 0 0);
    }
    
    atmosphere
    {
       type            pressureInletOutletVelocity;
       value           uniform (0 0 0);
    }
}

体积项用setField，但这样不对，求大神帮忙:big_mouth: