湍流模型编译通过但是在计算的时候显示不能加载动态库

[风大仙]

请教各位老师，在DES模型的基础上做了修改，wmake后：

wmakeLnInclude: linking include files to ./lnInclude
Making dependency list for source file myTurbulentTransportModels.C
g++ -std=c++11 -m64 -DOPENFOAM=1806 -Dlinux64 -DWM_ARCH_OPTION=64 -DWM_DP -DWM_LABEL_SIZE=64 -Wall -Wextra -Wold-style-cast -Wnon-virtual-dtor -Wno-unused-parameter -Wno-invalid-offsetof -Wno-attributes -Wno-unknown-pragmas -O3  -DNoRepository -ftemplate-depth-100 -I../turbulenceModels/lnInclude -I/home/fxr/OpenFOAM/OpenFOAM-v1806/src/transportModels -I/home/fxr/OpenFOAM/OpenFOAM-v1806/src/finiteVolume/lnInclude -I/home/fxr/OpenFOAM/OpenFOAM-v1806/src/meshTools/lnInclude -I/home/fxr/OpenFOAM/OpenFOAM-v1806/src/TurbulenceModels/turbulenceModels/lnInclude -I/home/fxr/OpenFOAM/OpenFOAM-v1806/src/TurbulenceModels/incompressible/lnInclude -IlnInclude -I. -I/home/fxr/OpenFOAM/OpenFOAM-v1806/src/OpenFOAM/lnInclude -I/home/fxr/OpenFOAM/OpenFOAM-v1806/src/OSspecific/POSIX/lnInclude   -fPIC -c turbulentTransportModels/myTurbulentTransportModels.C -o Make/linux64GccDPInt64Opt/turbulentTransportModels/myTurbulentTransportModels.o
g++ -std=c++11 -m64 -DOPENFOAM=1806 -Dlinux64 -DWM_ARCH_OPTION=64 -DWM_DP -DWM_LABEL_SIZE=64 -Wall -Wextra -Wold-style-cast -Wnon-virtual-dtor -Wno-unused-parameter -Wno-invalid-offsetof -Wno-attributes -Wno-unknown-pragmas -O3  -DNoRepository -ftemplate-depth-100 -I../turbulenceModels/lnInclude -I/home/fxr/OpenFOAM/OpenFOAM-v1806/src/transportModels -I/home/fxr/OpenFOAM/OpenFOAM-v1806/src/finiteVolume/lnInclude -I/home/fxr/OpenFOAM/OpenFOAM-v1806/src/meshTools/lnInclude -I/home/fxr/OpenFOAM/OpenFOAM-v1806/src/TurbulenceModels/turbulenceModels/lnInclude -I/home/fxr/OpenFOAM/OpenFOAM-v1806/src/TurbulenceModels/incompressible/lnInclude -IlnInclude -I. -I/home/fxr/OpenFOAM/OpenFOAM-v1806/src/OpenFOAM/lnInclude -I/home/fxr/OpenFOAM/OpenFOAM-v1806/src/OSspecific/POSIX/lnInclude   -fPIC -shared -Xlinker --add-needed -Xlinker --no-as-needed Make/linux64GccDPInt64Opt/turbulentTransportModels/myTurbulentTransportModels.o -L/home/fxr/OpenFOAM/OpenFOAM-v1806/platforms/linux64GccDPInt64Opt/lib \
    -lincompressibleTransportModels -lturbulenceModels -lfiniteVolume -lmeshTools -lincompressibleTurbulenceModels  -o /home/fxr/OpenFOAM/fxr-v1806/platforms/linux64GccDPInt64Opt/lib/test1_libIncompressibleTurbulenceModels.so

以上编译应该是没问题的，但是当我在算例中调用新的湍流模型后就报错：

Create time

--> FOAM Warning : 
    From function void* Foam::dlOpen(const Foam::fileName&, bool)
    in file POSIX.C at line 1516
    dlopen error : /home/fxr/OpenFOAM/fxr-v1806/platforms/linux64GccDPInt64Opt/lib/test1_libIncompressibleTurbulenceModels.so: undefined symbol: _ZNK4Foam9LESModels17kOmegaSSTIDDES_TrINS_29IncompressibleTurbulenceModelINS_14transportModelEEEE5GbyNuERKNS_16DimensionedFieldIdNS_7volMeshEEESA_SA_
--> FOAM Warning : 
    From function bool Foam::dlLibraryTable::open(const Foam::fileName&, bool)
    in file db/dynamicLibrary/dlLibraryTable/dlLibraryTable.C at line 109
    could not load "test1_libIncompressibleTurbulenceModels.so"
Create mesh for time = 0


PIMPLE: no residual control data found. Calculations will employ 5 corrector loops

Reading field p

Reading field U

Reading/calculating face flux field phi

Selecting incompressible transport model Newtonian
Selecting turbulence model type LES
[0] 
[0] 
[0] --> FOAM FATAL ERROR: 
[0] Unknown LESModel type banana

Valid LESModel types:

12
(
DeardorffDiffStress
Smagorinsky
SpalartAllmarasDDES
SpalartAllmarasDES
SpalartAllmarasIDDES
WALE
dynamicKEqn
dynamicLagrangian
kEqn
kOmegaSSTDDES
kOmegaSSTDES
kOmegaSSTIDDES
)

而且可以看到有效模型里面并没有出现自己修改的湍流模型，请问各位老师是什么原因？？？
make/files如下

turbulentTransportModels/myTurbulentTransportModels.C
LIB = $(FOAM_USER_LIBBIN)/test1_libIncompressibleTurbulenceModels

make/options如下

EXE_INC = \
-I../turbulenceModels/lnInclude \
-I$(LIB_SRC)/transportModels \
-I$(LIB_SRC)/finiteVolume/lnInclude \
-I$(LIB_SRC)/meshTools/lnInclude \
-I$(LIB_SRC)/TurbulenceModels/turbulenceModels/lnInclude \
-I$(LIB_SRC)/TurbulenceModels/incompressible/lnInclude



LIB_LIBS = \
-lincompressibleTransportModels \
-lturbulenceModels \
-lfiniteVolume \
-lmeshTools \
-lincompressibleTurbulenceModels

用的openfoam1806，感谢

[李东岳]

要在你的算例controlDict里面，挂在这个库

libs ("libmy.so");

[风大仙]

@李东岳 谢谢李老师，计算之前controlDict已经事先挂载过了

libs ("test1_libIncompressibleTurbulenceModels.so");

[mingyang]

@风大仙 你好，我也遇到同样的问题，请问这个问题后来你是怎么解决的？感谢！