求问ICEM中的楔形网格导入openfoam之后壁面条件如何修改
-
原模型是圆柱燃烧室，为了简化计算只画了1/12的部分
我个人想法是将两个面改为wedge，但是checkMesh的时候发现识别不了，会报错，求大神指教报错如下：
Checking geometry...
Overall domain bounding box (0 -6.363451432e-19 -1.169089492e-12) (0.2372166655 0.01928534508 0.009642672539)
Mesh has 2 geometric (non-empty/wedge) directions (1 1 0)
Mesh has 3 solution (non-empty) directions (1 1 1)
Wedge WALL_RANSHAOSHI2 with angle 0 degrees
***Cannot find opposite wedge for wedge WALL_RANSHAOSHI2
Boundary openness (-1.075387266e-17 -1.69211467e-15 -1.2396473e-14) OK.
Max cell openness = 4.03570353e-16 OK.
Max aspect ratio = 7.562500293 OK.
Minimum face area = 4.890642405e-09. Maximum face area = 2.500000033e-07. Face area magnitudes OK.
Min volume = 6.010518271e-13. Max volume = 9.284234891e-11. Total volume = 1.511515734e-05. Cell volumes OK.
Mesh non-orthogonality Max: 63.85295712 average: 15.3592327
Non-orthogonality check OK.
Face pyramids OK.
Max skewness = 0.8283279386 OK.
Coupled point location match (average 0) OK.Failed 1 mesh checks.
