Error when using wmake libso

[yuhxFoamer]

是的，加了力矩计算

[bestucan]

你的改动的地方是OpenFOAM自保留的部分。那里的东西都被各种脚本安排的明明白白不能乱动。如果要修改，需要另起炉灶。最粗暴的也要把修改过的文件放到当前文件夹，然后include的时候把<>换成“”

[星星星星晴]

@yuhxFoamer 同意楼上，如果说要建立自己的模型，最好是重新再user_src复制一个该模型，改个名字。

[yuhxFoamer]

@bestucan 我是另起炉灶搞得，没有改源代码

[bestucan]

@yuhxFoamer 那个错误很清楚啊，就是你在它想要放链接的位置已经放了一个同名的文件。我的意思是源代码的位置要另起炉灶，不是内容。或者哪怕位置不另起炉灶，不要用人家用过的文件名字。

[yuhxFoamer]

@bestucan 是的，我在另外一个位置搞的，名字也改了

[bestucan]

@yuhxFoamer 那你的炉灶起的太干净了……都是手动的，很容易出问题。
比如wmakeLnInclude的描述

# Description
#     Link all the source files in the <dir> directory into <dir>/lnInclude

应该是 link 到某个 lnInclud 的，wmake是个加壳的make。在foam文件夹下的wmake里有操作过程。wmake调用wmakeLnIncludeAll，wmakeLnIncludeAll调用wmakeLnInclude。硬调也不是不能调。问题可能在option。

植入代码这种事情，如果不是轻车熟路。有个笨方法，但很稳。先把自带的A复制成A1，除了名字什么都不动，基本不会出错。然后再趁计算机不注意，把A1里的东西悄咪咪的、慢慢的换成你的。期间常编译看效果。

[yuhxFoamer]

@bestucan 我是整个植入完了再编译的，我看其他没啥问题，就这里编译过不去

[yuhxFoamer]

@bestucan 这都还没到wmake的编译错误，这里只是wmake libso

[bestucan]

@yuhxFoamer 这哪里是编译不过去，这都没开始编译。wmake就是腾挪源文件的，g++给的才是编译错误。libso 只是 wmake 的运行参数，这个错误只是bash脚本里写的输出。 不过你的命令提示符真是绝了，才看件那是个命令

[bestucan]

那啥，你把"."去了就行了눈_눈

[yuhxFoamer]

@bestucan

intermediateNew$ wmake libso
wmake libso .
g++ -std=c++11 -m64 -Dlinux64 -DWM_ARCH_OPTION=64 -DWM_DP -DWM_LABEL_SIZE=32 -Wall -Wextra -Wold-style-cast -Wnon-virtual-dtor -Wno-unused-parameter -Wno-invalid-offsetof -O3  -DNoRepository -ftemplate-depth-100 -I/home/hoyu/OpenFOAM/OpenFOAM-5.x/src/lagrangian/basic/lnInclude -I/home/hoyu/OpenFOAM/OpenFOAM-5.x/src/lagrangian/distributionModels/lnInclude -I/home/hoyu/OpenFOAM/OpenFOAM-5.x/src/transportModels/compressible/lnInclude -I/home/hoyu/OpenFOAM/OpenFOAM-5.x/src/thermophysicalModels/specie/lnInclude -I/home/hoyu/OpenFOAM/OpenFOAM-5.x/src/thermophysicalModels/basic/lnInclude -I/home/hoyu/OpenFOAM/OpenFOAM-5.x/src/thermophysicalModels/thermophysicalProperties/lnInclude -I/home/hoyu/OpenFOAM/OpenFOAM-5.x/src/thermophysicalModels/reactionThermo/lnInclude -I/home/hoyu/OpenFOAM/OpenFOAM-5.x/src/thermophysicalModels/SLGThermo/lnInclude -I/home/hoyu/OpenFOAM/OpenFOAM-5.x/src/thermophysicalModels/radiation/lnInclude -I/home/hoyu/OpenFOAM/OpenFOAM-5.x/src/transportModels -I/home/hoyu/OpenFOAM/OpenFOAM-5.x/src/regionModels/regionModel/lnInclude -I/home/hoyu/OpenFOAM/OpenFOAM-5.x/src/regionModels/surfaceFilmModels/lnInclude -I/home/hoyu/OpenFOAM/OpenFOAM-5.x/src/dynamicFvMesh/lnInclude -I/home/hoyu/OpenFOAM/OpenFOAM-5.x/src/sampling/lnInclude -I/home/hoyu/OpenFOAM/OpenFOAM-5.x/src/finiteVolume/lnInclude -I/home/hoyu/OpenFOAM/OpenFOAM-5.x/src/meshTools/lnInclude -IlnInclude -I. -I/home/hoyu/OpenFOAM/OpenFOAM-5.x/src/OpenFOAM/lnInclude -I/home/hoyu/OpenFOAM/OpenFOAM-5.x/src/OSspecific/POSIX/lnInclude   -fPIC -c parcels/derived/basicKinematicParcel/defineBasicKinematicParcel.C -o Make/linux64GccDPInt32Opt/parcels/derived/basicKinematicParcel/defineBasicKinematicParcel.o
In file included from lnInclude/KinematicParcel.H:692:0,
                 from parcels/derived/basicKinematicParcel/basicKinematicParcel.H:40,
                 from parcels/derived/basicKinematicParcel/defineBasicKinematicParcel.C:26:
lnInclude/KinematicParcelI.H:127:8: error: prototype for ‘Foam::KinematicParcel<ParcelType>::KinematicParcel(const Foam::polyMesh&, const barycentric&, Foam::label, Foam::label, Foam::label, Foam::label, Foam::scalar, Foam::scalar, Foam::scalar, const vector&, const vector&, const Foam::KinematicParcel<ParcelType>::constantProperties&)’ does not match any in class ‘Foam::KinematicParcel<ParcelType>’
 inline Foam::KinematicParcel<ParcelType>::KinematicParcel

sorry我看眼花了，多加了个点这下输出真正的编译错误了